sE Electronics DM1 Microphone Preamp
Code: PR-34563Product detailed description
Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.Additional parameters
| Category: | Microphone Preamps |
|---|---|
| Package Contents: | Manual |
| Impedance: | 200 Ohm |
| Weight: | 80 g |
| Number of Channels: | 1 |
| Sensitivity: | XLR: -55 dBV/Pa (1,78 mV) 1kHz |
| Type: | Preamp |
| Application: | Studio |
| Phantom Power: | Yes |
| Frequency Range: | 10 Hz - 120 kHz |
| Outputs: | XLR |
| Inputs: | XLR |
| Sound Pressure Level (SPL): | 135 dB |
| Power Supply: | 48V Phantom |
| Gain: | 28 dB |
| Impedance amount: | 200.0 |
| Impedance measure: | ohm |
| Weight amount: | 80.0 |
| Weight measure: | g |
| Sound Pressure Level (SPL) amount: | 135.0 |
| Sound Pressure Level (SPL) measure: | db |
| Gain amount: | 28.0 |
| Gain measure: | db |
Discussion
Be the first who will post an article to this item!