Oxford Oximiser 900 Essential Battery Management System
Code: PR-9047Product detailed description
Oximiser 900 can be left permanently connected to provide guaranteed long term battery care.Suitable for most 12V battery types up to 30Ah, including Gel, MF and Acid batteries. Heavily discharged batteries as low as 4.1V can be charged if the battery is not damaged. Do not use on Lithium batteries.6 Stage battery management system:Polarity check:Checks the battery leads have been connected correctlyBattery Analysis:Assesses battery & determines best charging methodBulk Fast Charge: Charges at a fast rate to bring the battery to approximately 85% capacityAbsorption Charge:Lowers the charge rate & gives a topping charge to ensure the battery is charged to 100%Voltage Check:Hourly voltage checks assess battery healthMaintain Mode:Applies an appropriate charge if voltage drops outside acceptable limits to ensure the battery voltage and condition remains perfectAdditional parameters
| Category: | Batteries & Chargers |
|---|---|
| Voltage: | 12 V |
| Current: | 0,9 A |
| Length: | 128 mm |
| Weight: | 0,4 kg |
| Width: | 88 mm |
| Height: | 39 mm |
| UK/EU Power supply included: | Yes |
| Power Supply: | 230V |
| Current (A): | 0.9 |
| Voltage amount: | 12.0 |
| Voltage measure: | v |
| Current amount: | 0.0 |
| Current measure: | a |
| Length amount: | 128.0 |
| Length measure: | mm |
| Weight amount: | 0.0 |
| Weight measure: | kg |
| Width amount: | 88.0 |
| Width measure: | mm |
| Height amount: | 39.0 |
| Height measure: | mm |
| Power Supply amount: | 230.0 |
| Power Supply measure: | v |
Discussion
Be the first who will post an article to this item!